Discuss Mews Products

Hello Mews Community,I’m looking for advice on how to correctly set up tourist tax for our property in The Hague. Currently, we have tourist tax configured as a product with a product rule attached. However, in The Hague, tourist tax is only applicable for guests aged 13 and above.The challenge we’re facing is that the product rule in Mews doesn’t allow us to add age conditions. Has anyone found a workaround or an alternative method to handle this kind of setup?Any insights or suggestions would be greatly appreciated!Thanks in advance,Ivo

How do I determine which of the addresses on a profile is to be the primary address ? 

Hallo zusammen,bei uns gibt es die Option rechts über den Kategorien “ Vor Ort Essen” und “Zum Mitnehmen” - gerne würde ich “Zum Mitnehmen” löschen. Man kann da automatisch eine Anpassung der MWST hinterlegen, da wir aber nichts haben, was man mitnehmen kann, würde ich das gerne deaktivieren. Ich weiß allerdings nicht wie. Hat da jemand eine Ahnung?LG, A. Faber 

Bonjour,Nous avons une différence entre les chiffre d’affaire sur lightspeed et mews alors que les 2 sont reliés et bien paramètrés. Pourriez vous nous aider svp ?bien à vous 

Hello all,Our housekeeper manager tried to install the Mews App on her iPhone in order to release rooms quicker but when she launch the app, it says Fatal Error everytime.Can you please provide us a solution in order to fix the problem ?Thank youBest regards,Antoine

Any thoughts on the below - upvote in feedback In housekeeping operations, efficiency and planning are key. Currently, housekeepers rely on a “fixed” amount of time per space, depending on the category, features, and other variables. To streamline this process, it would be highly beneficial to introduce a dedicated field within the Space Category settings for allocating the average time required to clean each space type.Example Time Allocations:Standard Room: 20 minutes Junior Suite: 45 minutes Shared Dormitory with 6 Beds: 1 hourBenefits of This Feature:Enhanced Planning

Hi everyone,We’re currently in the process of migrating to Mews, and one of the key areas we’re re-evaluating is our rate structure. In our previous system, we had an overwhelming 200+ rates! These rates were primarily created to gain segment insights and were set up for nearly everything—corporate contracts, GDS bookings, OTA channels, direct bookings, and more. While this worked for us in the past, it led to a lot of complexity in managing, maintaining, and analyzing our rate setup.As we transition to Mews, I’m keen on finding ways to streamline and simplify this approach. For instance:Corporate Rates: I don’t see the need to set up an individual rate for every single corporate negotiated contract anymore. There must be a more efficient way to manage this while still maintaining clarity in reporting and segmentation. Channel Rates: Similarly, creating rates for each channel (OTA, direct, etc.) feels unnecessary,

Hi,I'm looking for clarification on housekeeping intervals for long-stay bookings. Our goal is to clean each room every 7 days, but we want to control the specific day of the week when this cleaning occurs.I assumed that marking a room as "clean" would reset the 7-day interval each time. However, it seems the interval is only tied to the "system" status change date. For example, one room was marked "dirty" on November 5, and we cleaned it on November 8. Ideally, the 7-day interval would start from the most recent clean date (November 8), resetting the next cleaning date to November 15. But in this case, the interval reset on November 12, which is 7 days after the system’s initial "dirty" mark on November 5.Is there a way to adjust settings so the 7-day interval starts from the last manual cleaning date rather than the system date? 

Hi! Anyone else here using the Sabre/SynXis integration and having trouble or has some tricks due to age categories? Set up in Mews must be right, because both BE and booking.com take the right rates/ extra fees for children, but somehow the mapping/ connection between Synxis and Mews is not working. Support ticket is going on, but wanted to ask the community too…Best regards, Karo, Hindsæter, Norway

Hello, I have been live with the Expedia direct connect with MEWS and been working with support, but I keep getting different answers. I try it, it doesn’t work. I am looking for advice on setting up Expedia Collect and Hotel Collect mapping in market place.We have 2 rate plans, 1 for Expedia Collect and 1 for Hotel Collect. I can only map 1 and I can only select Hotel Collect or Expedia collect.If I use the Expedia Collect rate code with the collect type Expedia, then ALL bookings go to the Expedia Collect rate plan. Meaning, if a guest books Hotel Collect, it books in MEWS against Expedia Collect. And, visa versa on that.This has been a back and forth with support for a month and no solutions from support are fixing the issue. Has anyone else found the right answer?

Good morning, we would like the credit card to be needed in order to make a reservation through our Mews booking engine. Credit card either as a guarantee (standard rate) or charged (if non refundable rate) Ìs there an option ? thanks 

As we establish our group accommodation billing process, we've identified the need to issue pro forma invoices or invoices that specify a deposit amount—such as 33%—to confirm a booking. This functionality is particularly essential for group bookings, where securing reservations often requires a partial payment upfront.Currently, Mews does not provide the option to generate an invoice based on a percentage of the booking total. Instead, the system only allows invoicing for the entire amount, which can complicate transactions and discourage early booking confirmations. Adding a feature to invoice for partial payments would streamline the booking process, make payment terms clearer, and improve cash flow management.For group and corporate bookings, this capability would offer hotels a competitive edge by providing a more professional and flexible invoicing system. I believe developing this feature would be an invaluable enhancement to the platform, supporting both financ

Hello, I don't know if this topic has already been discussed. We've noticed, following feedback from a customer who checked in online, that when the customer fills in the online check-in form, the form confirms “the room category assigned”. However, in my opinion, it would be preferable to indicate “the room category reserved”, especially in relation to the paid upgrade feature of the reservation. For example, if we have upgraded a guest for free (for whatever reason, construction work, overbooking, etc.) and then, when they arrive, we change them back to their original category, it could be confusing for them. We've also had the case where the room number assigned to him was confirmed on the form, even though this room number can change at the last minute. Wouldn't it be better in this case to indicate “the category of room booked” on the online check-in form, and above all not to indicate the room number? If this is something we can do ourselves, could you please get back to

Hello community, does anyone have experience with Lacoly App (https://lacoly.com/en/) ? We are looking for comunicate with our guests through whatsapp and Lacoly solution seems to fit.I want to know if anyone in the community have any experience with this 3rd partie integrator. Any information/recomendation on this topic, will be appreciated.Regards, Nicolas.

If a client chooses an add-on in the booking journey ( a bookable product) - how do I get the confirmation to display the following:-Room Rate Add on price Total price I have looked at the functions / placeholders {summaryHtml} {reservationDetailsHtml} {DetailsHtml} However none of them provide a price for the Add on…...

Hi everyone 🖐️, For the moment our invoice look like this  : I’d like to know how I can get a detailled invoice ‘cause sometimes the guests need a detailled invoice and sometimes not. How can I proceed to do that ? Thanks for the answer Antoine Dieudonné.

Hey,We recently reviewed our data regarding the booking engine and noticed that the conversion rate is really low when users come via Metasearch.For us, this has a lot to do with the information about the hotel that guests receive from the booking engine.Currently, users are redirected straight to the "select category" section, which is generally great, but it can be overwhelming for guests as no other information about the hotel is provided. I think to improve the conversion rate, it would be great to rebuild this section of the booking engine and include the possibility to add more general information.Is there something we might already be missing? What’s your take on this? Would be good to have some feedback. Best Hendrik  

Recently Mews decided to change the checkin / kiosk to not include guest companions anymore. In the current state the fetched information is below the minimum we need.Also problematic about the whole change is that this wasn’t communicated beforehand but instead a day late. With the impact on workflows and the confusion it created that should really be handled differently the next time.Right now we are looking for alternatives to replace the checkin / kiosk with a system that let us fetch the information we need but we don’t really want another service for that. I know that there are some plans to allow us to customize the information collected by the checkin which would completely solve the problems we have right now.Is there a rough timeline about these changes so we can plan accordingly?

Hello, We’ve been getting Mews emails lately: “as per your request; you can reset your account password ….”However, no (active) staff member or myself asked for a password reset.I can apparently disregard this e-mail. However, should I be worried someone is trying to get into my account?

Hi. I wonder why the action log does not offer any “undo” buttons? As an admin I am also only a human being and I do make mistakes when it comes to setting rates, adjusting rates, changing reservations ao. Pluss the lovely hotel guests make changes, want different rooms ao.Should be a no brainer to put up an “undo” feature? As this one will get logged too…Or am I blind for the actual possibility already being there?Best regards,Karola, Hindsæter, Norway

We currently use a third party to handle online checkin and digital keys, one of the main reasons is that we find it useful to know approximately what time guests would like to check in, and this to be automatically reflected in the arrival time shown in Mews. It also gives the guest the opportunity to buy early check in as an extra.Now that Mews is offering digital keys, I want to see if we can stop using and paying for the third party system and do everything in Mews, hopefully also giving a more seamless experience for the guest.According to the Mews support chat it is possible to ask guests for arrival time in the Mews online check in, but I have never been able to find out how to do this.Has anyone got this working directly in Mews?

Is there a way to disable the pre arrival e-mail that is sent the morning of arrival.I know that there is a option in the bookable service but i am not sure if this deactivates both the mail two days before arrival and the mail on the day of arrival.Is there a way to disable only the mailing on the day of arrival?